## The Riemann-Stieltjes Integral II

What with cars not working right, I’m *not* along with the undergraduate math club at the MAA meeting in Lake Charles. That honor goes to Steve Sinnott alone. And so I’m still back in New Orleans, and I may as well write another post today.

Let’s follow on yesterday’s discussion of the Riemann-Stieltjes integral by looking at a restricted sort of integrator. We’ll assume here that is continuously differentiable — that is, that exists and is continuous in the region we care about. We’ll also have a function on hand to integrate.

Now let’s take a tagged partition and set up our Riemann-Stieltjes sum for

We can also use the partition to set up a Riemann sum for

Now the Differential Mean Value Theorem tells us that in each subinterval there is some so that . We stick this into the Riemann-Stieltjes sum and subtract from the Riemann sum

And continuity of tells us that as we pick the partitions finer and finer, we’ll squeeze and together, and so goes to zero. So, when the integrator is continuously differentiable, the Riemann-Stieltjes integral reduces to a Riemann integral

Now let’s go back to the fence story from yesterday. There’s really some function that tells us the height of the fence at position . We got our integrator from the function , which takes a time and gives the position at that time. Thus our function giving height at time is the composition . We also note that as time goes from to , we walk from to . If we put all this into the above equation we find

which is just our change of variables formula.

So here’s what this formula means: we have a real-valued function on some domain — here it’s the height of the fence as a function of position along the ground. We take a region in the space of these variables — the section of the fence we’re walking past — and we “parametrize” it by describing it with a (sufficiently smooth) function taking a single real variable — the position function . We “pull back” our function by composing it with this parametrization, giving us a real-valued function of a real variable, which we can integrate.

The deep thing here is that we have *two different* parametrizations. We can describe position as meters from a fixed starting point, or we can describe it as the point we’re passing at seconds from a certain starting time. In fact, as we change our function we get all sorts of different parametrizations of the same stretch of ground. And we should measure the same area for the same fence no matter which parametrization we choose.

Given a parametrization , the integral in our recipe will be the Riemann-Stieltjes integral

which we can reduce to the Riemann integral

and it will be the same answer as if we used the “natural” parametrization

And that’s why the change of variables works.

Do you have any secret plans or motivations for introducing the Riemann-Stieltjes integral, e.g., as key of entry into other more advanced topics in real and functional analysis?

Comment by Todd Trimble | February 29, 2008 |

I don’t have any particular plans. I just find it’s an important stepping stone towards real understanding of integration, and one that’s too often skipped over in the interests of time. In particular, I think that having it down helps understand what’s going on when we move to a measure-theoretic viewpoint.

Comment by John Armstrong | February 29, 2008 |

It’s kinda spooky, but since your post on Integration by Parts your posts are lining up almost spot on with the lectures in my Advanced Calc class. I had to miss today’s lecture (long story…) but I’m almost sure that we’re leading into Riemann-Stieltjes integrals and then measure theory. So thanks for the companion postings, they’ve been great. :D

Comment by Geoff | March 1, 2008 |

Well, if your class is doing Riemann-Stieltjes you’ve got a great class there. Most advanced calculus classes leave it out.

Comment by John Armstrong | March 1, 2008 |

[...] Riemann-Stieltjes Integral III Last Friday we explained the change of variables formula for Riemann integrals by using Riemann-Stieltjes integrals. Today [...]

Pingback by The Riemann-Stieltjes Integral III « The Unapologetic Mathematician | March 3, 2008 |

[...] Let’s do one more easy application of the Riemann-Stieltjes integral. We know from last Friday that when our integrator is continuously differentiable, we can reduce to a Riemann [...]

Pingback by The Riemann-Stieltjes Integral IV « The Unapologetic Mathematician | March 6, 2008 |

thanks for your write up, really help me grasp the concept. There seems to a lot of parralles to the line integral. am i correct in thinking riemann-stieltjes integral is like a line integral? is there a difference ?

Comment by ipk | February 16, 2010 |

Line integrals, when I get to them, will ultimately be related back to Riemann integrals. Essentially, the Riemann integral is the line integral along a one-dimensional curve in a one-dimensional space.

There will be a generalization of things like the change-of-variables formula which ultimately lets us translate integrals over curves in other spaces to integrals in one-dimensional spaces, which are Riemann integrals.

Comment by John Armstrong | February 16, 2010 |

thanks i’m looking forward to it.

Comment by isaiahperumalla | February 16, 2010 |

Riemann Stieljes integtal is a very vast in terms of applications. But I really want to know of it’s applications.Also consider Sturm Liouville’s problems in DE.

Comment by Mhammad Rahmatullah Ibrahim | May 30, 2010 |

Riemann Stieljes integtal is a very vast in terms of applications. But I really want to know of it’s applications.Also consider Sturm Liouville’s problems in DE.

Comment by Muhammad Rahmatullah Ibrahim | May 30, 2010 |

In the portion in the above post where you show the R-S integral reduces to the R integral provided the integrator is continuously differentiable, would the following proof work?

Since attains its max on [a,b], for all partitions . This implies

as desired.

It's shorter and I've been arguing with someone that tells me step 4 to step 5 is incorrect but can't tell me precisely why this is the case. It makes sense to me because the limit of products is the same as the product of limits. Anyway, if you would weigh-in, I would appreciate it very much.

Comment by Jose | June 2, 2010 |

Okay, Jose, I’ve tried to format your comment a bit, so tell me if I broke anything.

What I’d say is the problem here is you’re trying to take the term

and have it become the function in the limit. The problem is that the term needs to be the evaluation of the function at the sample points of some labelled partition.

In fact, you can be pretty sure that in general you

don’thave for the same where you’ve evaluated . So what you need to show is that there are always sample points so thatfor each .

Comment by John Armstrong | June 2, 2010 |

Thank you for your reply. The samples should be the same. I had to think about it. I believe my fallacy was in thinking the limit and the summation could be interchanged as from line 2 to line 3:

\begin{align}

\int_a^b f(x)d\alpha(x)&=\lim_{|x|\to 0}\sum_{i=1}^n f(t_i)[\alpha(x_i)-\alpha(x_{i-1})]\\

&=\lim_{|x|\to 0}\sum_{i=1}^n f(t_i)\frac{\alpha(x_i)-\alpha(x_{i-1})}{x_i-x_{i-1}}(x_i-x_{i-1})\\

&=\sum_{i=1}^n \lim_{|x|\to 0} f(t_i)\frac{\alpha(x_i)-\alpha(x_{i-1})}{x_i-x_{i-1}}(x_i-x_{i-1})\\

&=\sum_{i=1}^n \lim_{|x|\to 0} f(t_i)(x_i-x_{i-1})\lim_{|x|\to 0}\frac{\alpha(x_i)-\alpha(x_{i-1})}{x_i-x_{i-1}}\\

&=\lim_{|x|\to 0}\sum_{i=1}^n f(t_i)(x_i-x_{i-1})\lim_{|x|\to 0}\frac{\alpha(x_i)-\alpha(x_{i-1})}{x_i-x_{i-1}}\\

&=\int_a^b f(x) dx\, \alpha ‘(x)

\end{align}

Thanks again!

Comment by Jose | June 3, 2010 |

Yes, exactly. To get the sample points, you need to pull part of the limit inside the sum. You can’t just take the limit of the difference quotient to get the derivative without taking the

wholelimit at once.Comment by John Armstrong | June 3, 2010 |